BTYVS - ALUMINUM HYDROXIDE, 0518
- MSDS: BTYVS
- Manufacturer: J T BAKER INC
- Product Name: ALUMINUM HYDROXIDE, 0518
- National Stock Number: 6810-00N048710
Product Identification
Product ID:ALUMINUM HYDROXIDE, 0518
MSDS Date:09/03/1992
FSC:6810
NIIN:00N048710
MSDS Number: BTYVS
Responsible Party
PHILLIPSBURG, NJ 08865
US
Emergency Phone: 908-859-2151;800-424-9300(CHEMTREC)
Info Phone: 800-582-2537
Cage: DO803
Contractor
Telephone: 800-582-2537
Cage: 70829
Ingredients
ALUMINUM HYDROXIDE
CAS: 21645-51-2
RTECS: BD0940000
Fraction By Weight: 98-100%
OSHA PEL N/K
ACGIH TLV: 2 MG/M3 (AL)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL/SKIN/SKIN ABSORP/INGEST:
NONE IDENTIFIED. EYE CONTACT: IRRITATION. CHRONIC: NONE IDENTIFIED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE IDENTIFIED.
First Aid
First Aid:INGEST:IF SWALLOWED & PERSON IS CONSCIOUS, IMMED GIVE LG AMTS
OF WATER. GET MED ATTN. INHAL: MOVE TO FRESH AIR. SKIN: IMMED WASH
SKIN W/PLENTY OF SOAP & WATER FOR AT LEAST 15 MINUTES. EYE: IMMED
FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
Fire Fighting
Extinguishing Media:USE EXTINGUISHING MEDIA APPROPRIATE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE IDENTIFIED.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROTECTIVE CLOTHING. CAREFULLY
SWEEP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED.
SUITABLE FOR ANY GENERAL CHEMICAL STORAGE AREA. CAUSES EYE
IRRITATION. AVOID CONT W/SKIN, EYES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION IS HIGH, USE AN
APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR/DUST MASK.
Ventilation:USE ADEQUATE GENERAL OR LOCAL EXHAUST VENTILATION TO KEEP
FUMES/DUST LEVELS AS LOW AS POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Spec Gravity:2.40(H*2O=1)
Solubility in Water:NEGLIGIBLE(<0.1%)
Appearance and Odor:WHITE POWDER, ODORLESS
Percent Volatiles by Volume:0@21C
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:MOISTURE.
Hazardous Decomposition Products:NONE IDENTIFIED.
Disposal
Waste Disposal Methods:DISPOSE I/A/W ALL APPLICABLE FEDERAL, STATE, AND
LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.